DFE Rated Filter Elements Non-Spark Discharge
Element Upgrades Prevent Fluid Degradation & Extend Additive
Life Link to NSD Elements
|
Upgrades/Interchange for:
Caterpillar Cuno Donaldson FilterDyne General
Electric (GE) Hilco Hydac Isopur Kaydon Moog National Filtration Pall Parker Solar Siemens
Westinghouse Western
|
ICB- Dry Ion Charge Bonding
Acid Scavenging Elements for Phosphate Ester EHC Systems Direct Replacement for Selexsorb, DE & similar
elements ICB acid scavenging elements featuring EPT media technology are critical to maintaining
low acid number and removing dissolved metals added to fluid by other acid removal technologies that lead to gels & deposits
and poor air release properties. |
COD Diesel Fuel Conditioning SkidCOD coalesce
skids rapidly remove water from diesel fuel > 99% single pass water removal efficiency and high efficiency particulate
filtration. COT Turbine Coalesce SkidCOT turbine oil coalesce skids rapidly remove water from turbine oil with > 95% single
pass efficiency, control particulate to 16/14/11 and lower. |
SVR Soluble Varnish Removal Skid When combustion and steam turbines fall victim to unit trip or fail-to-start condition varnish is the usual
suspect. The SVR (Soluble Varnish Removal) is the proven solution to make varnish vanish!
|
ECR Electrostatic Contamination Removal SkidECR electrostatic removes submicron particles created by thermal degradation in hydraulic
or lube oil. Ideal for steam turbine EHC systems with dark fluid
|
TMR Reservoir Headspace DehydratorTMR introduces air with 150°F dew point suppression into reservoir headspace
to maintain water levels < 300 ppm in EHC reservoir phosphate ester (to 1,000 gal / 3,750 liter
reservoirs).
|
V1 Mini Vacuum Dehydrator. The V1 mini vacuum dehydrator removes free & dissolved water from hydraulic &
lube oil. Portable for tight spaces, operates on a 120VAC 1P 60Hz requiring < 20 Amps. Ideal
for small reservoirs.
|
Vac-U-Dry Vacuum Dehydrator The VUD vacuum dehydrators rapidly remove free & dissolved water from hydraulic
& lube fluids up to ISO VG680. Achieve and maintain water levels to < 10 ppm. Intuitive design
is easy to operate
|
|
DFN- Seal Oil & BFP Filtration Upgrades
DFN duplex operating pressures up to 888 psi / 63 bar. Ideal for continuous operation
critical systems such as turbine seal oil, boiler feed pumps, FD-ID fan lube oil. Upgrade antiquated Auto-Kleen
filters to DFN.
|
DFH High Pressure Duplex Filter
DFH high pressure duplex operating pressures up to 3000 psi / 210 bar and flow
rates up to 58 gpm / 184 lpm with DFE rated glass media element options. DFH allows for element servicing without interrupting must
have continuous hydraulic system operation
|
DLF/DLFM High FLow Duplex
DLF / DLFM high flow low-medium pressure duplexes are ideal for critical high speed bearing
lube pumping skids & other high flow or high viscosity applications. Hy-Pro DFE rated coreless filter elements.
|
|
|
FCL- Filter Cart for High Viscosity
Fluid Conditioning & Transfer
|
|
|
|
|
|
